A&E by Dometic Slide Out Awning Tool Kit
- 1.00 LBS
- Calculated at Checkout
A&E Slide Out Awning Replacement Fabric Tool Kit
This is the Complete hand tool kit to replace any A&E by Dometic Slide Out Awning Fabric. Other than a cordless drill and a ladder or two this is all you need to replace that fabric like a pro! Over the years we have been asked what tools are needed and to our surprise very few people have them all. They have one or two of the tools but, not all of them. Almost nobody has 100% Silicone to lubricate the Awning Roller Tube or the Awning Rail attached to the side of the RV. Keep in mind a few drops go along ways! These tools are the same tools we use for every fabric we replace day in and day out.
After you replace one Slide Out Fabric you will be the pro that everyone will turn to for your expert help. Why not buy a tool kit just for A&E Slide Out Fabrics and keep it in your RV ready for the next time you or your buddy need your fabric replaced. Most A&E Side Out Awnings only need 1/4" driver as far as hex head screws go. And the Full Cover models need a 7/16 nut driver as well. We decided why not just include the whole set for the same price. Rather than 2 bits, you get 7 for the same price.
7 Piece Nut Driver Set - 3/16, 1/14, 9/32, 5/16, 11/32, 3/8, 7/16
Dupont 100% Silicone - 11oz Spray Can
Screw Driver with Phillips Tip for Pinning the Roller Tube in Place
Quick Change Bit Driver - This Stays in the Drill for fast Bit Replacement
#2 Phillips Head Bit - Used to Remove the Screw Holding the Fabric in the Awning Rail
#2 Square Tip Bit - Used to Remove the Screw Holding the Fabric in the Awning Rail